Lowspeed Handpiece Motors – Complete Overhaul: Most $159.00*
Pinpoint Dental Equipment Service services all brands of air drive handpiece motors, including the rotary vane type, and very popular Star Titan 5,000 and 20,000 R.P.M. motors. Also the Midwest Shorty; a turbine style with drive ring design which has proven popular with thousands of dental office personnel for years. Others include Kavo, W&H, and a host of other manufacturers.
The lowspeed motor category also includes prophy handpieces, such as the Midwest RDH, Kavo 181P, Micromite, Lares, and others. Pinpoint Dental Equipment Service repairs and services these, as well as dozens of other manufacture’s brands.
Lowspeed motor overhaul includes a complete disassembly, parts inspection, replacement of all worn parts, cleaning, lubrication and testing.
Combination straight bur or prophy type nosecone attachments, such as attach to the Star Titan motor, Midwest Shorty motor, and Kavo Intra 181K, are rebuilt, parts inspected replaced as needed, thoroughly cleaned, lubricated and tested. Normal wear parts are the chuck and chuck spring which hold the bur or prophy securely.
Depending on the type of motor you attach your nosecones to, it may be more cost effective to replace, rather then repair. If this is the case, Pinpoint Dental Equipment Service will contact you with options to can decide to proceed with.
Angle attachments, the attachment which connects to the motor, and operates a replicable lever, pushbutton, or other types of endodontic, latch bur, or friction grip bur, are also completely serviced and tested.
Lowspeed Angle Handpieces – Most $79.00 – $129.00*
These include the attachment to air motor handpiece, such as W&H Adec Trend WD-56 and Kavo 20E (fixed head latch bur). Also included in this category is the type which allow interchangeable heads – the ability to swap a friction grip bur head with a latch bur type head (lever or pushbutton) which includes the Kavo 29K as an example.
Lowspeed Attachment Heads: Complete Overhaul: Most $49.00 – $79.00*
Overhaul service for these includes replacement of both front and rear spindle (head cartridge) bearings. Cleaning, lubrication and testing, or cleaning, lubrication and testing if parts do not require replacement.
Note: In some cases, the cost of replacement would be preferred over service. In which case, Pinpoint Dental Equipment Service will call and advise you of this situation.
Clean, Lubrication, Testing
This service is for all lowspeed motors, attachments and heads which require cleaning only, with no parts replacement. As with a complete overhaul service mentioned above, a teardown, parts inspection, cleaning, lubrication and testing is conducted.
Lowspeed Handpiece Motors – $79.00
Lowspeed Nosecone Attachments – $45.00
Lowspeed Attachment Heads – $29.00
As with all handpiece service, prices quoted by Pinpoint Dental Equipment Service are for typical repair situations.
* Where excessive damage, such as damage from mishandling, non-standard special order parts, or OEM parts having to be ordered out of the country, a higher price then quoted above would normally occur. In any unusual situation such as this, Pinpoint Dental Equipment Service will give you a call and advise you of this prior to any procedure with repairs.